11. Terminal Access Control

In a Terminal Sharing environment, ESC have the option to control which Staff have the access to the EzeeLink Terminal.

11a. ESC can select the frequency for authentication.
- Sign In when terminal turn on, or
- Sign In required at each transaction.

11b. There are two types of authentication method
- Staff Sign In to Terminal using staff card.
- Staff Sign In to Terminal using 6 digits password.

11c. How to add Staff to Terminal?

Login to EzeeLink Merchant Website at http://ezeelink.mobile-money.com/Merchant

(1) After login, click "Terminal Maintenance"

(2) Select the Terminal by clicking on the Terminal ID where you want to add Staff to it.

(3) Select the type of Sign In frequency, you have 3 options:
a. Do not required - anybody can use the terminal, without any control.
b. Sign in when turn on terminal - once assigned, Staff only needs to Sign In once to use the Terminal. When done using the Terminal, Staff can Sign Out.
c. Sign In required at each transaction - Staff need to Sign In for every time he want to perform a transaction.

You must click “SAVE” at the bottom of the screen after selecting your option.

(4) Click “Add” to add user.


(5) Key-in Staff name

(6) Select authentication method, you have 2 options:
a. Input password – Staff Sign In to Terminal by key-in 6 digits password, or
b. Staff Card - Staff Sign In to terminal by touching staff card at terminal.

(7) Enter 6 digit pin or the Staff card number.

(8) Save your setting.


(9) Check if the new Staff already added and appeared in the list, to confirm the setting, click the “Save” button at the bottom of the page to save the setting.

The Staff adding process is now completed. You can now try the Staff Sign In to the Terminal.

For the Terminal to take effect, please restart the Terminal before you Sign In.

11d. Sign In to the Terminal

For the Terminal to take effect, please restart the Terminal.

If you have choose to "Sign In when terminal turn on"
- Go to F10 > Page 2 (press [Enter] to move to page 2)
- Select Sign In
- Tap Staff Card or Enter 6 digits password
- Press Enter to Sign In.
- Upon successful Sign In, Terminal will display "Berjaya Sign In"

If you have choose to "Sign In when terminal turn on"
- You can perform transaction as usual, only that the Terminal will required you to Sign In for every transaction.




Limiting Reprint Receipt rights


11e. Limiting Reprint Receipt rights
You may also configure EzeeLink Terminal in such a way that only designated personnel can Reprint receipt.

To begin, log in to the merchant web at http://ezeelink.mobile-money.com/Merchant

(1) After login, click "Terminal Maintenance"

(2) Select the Terminal by clicking on the Terminal ID where you want to limit re-printing.


(3) At the "Require Reprint Password" drop down box, select "Yes"

(4) A new section will appear on the webpage, now click [Add] button, to add the Staff that you want to allow Reprint receipt.

(5) A new section will appear, now you key-in the name of the Staff you want to allow Reprinting
(6) Key-in the 6 digits "Password", this Staff will use to Reprint.
(7) Click [Save] button to save the setting.


(8) Again click [Save] button at the bottom of the webpage to save the entire setting.


You have completed dedicating Staff to Reprint receipt at the Terminal.
For the Terminal to take effect, please restart the Terminal.

To reprint receipt go to Terminal press F10 > Print Transaction.
Now the Terminal should required you to Authenticate you Staff before allowing reprint receipt.